Dehumidifier &
Humidity Control Specialist
Way
Technovation
|
|
We provide a comprehensive range of
drying product to suit your most basic to very sophisticated requirement. Typical Control Range of Humidity: 5%, 10% RH for Electronics Dry cabinets and chambers 40% 45% , 50%, 55%, 60% RH for Aircon system 90-100% RH for wet chambers, incubators Below 15% RH for glove box 40-60% RH for dry cabinets Up to 70 deg C warm chambers with RH control Dry Cabinets using Compressed dry air, N2 or desiccator |
Click on each
picture below to view the individual
product details
|
short term
|
22 L/day |
|
|||
|
|
|
Click here to
email us if you are from Singapore
Click here to email
us if you are from other countries
|
|
Dr Storage Dry
Cabinet
|
Precision Humidifier
| ||
|
|
|
Click here to link to on site Calculation of Dew Point / RH / T g/kg/DB/WB / |
|
Military storaging
Since
the 1970's, desiccant equipment has been used by National defenses all over the
world for preservation by dehumidification. Inactive
ships, tanks, aircraft,
weapons and supplies are kept in dry air storages, provided by dehumidifiers.
The technology enables an increased
combat readiness and decreases the
preservation costs drastically.
| DH
is the short form for DEHUMIDIFIER RH is the short form for RELATIVE HUMIDITY |
 |
 |
 |
| Click here for Our Local Project Reference |
HMS Ark Royal, United Kingdom is kept in a state of extended readiness by 29 |
3000 Seibu Giken DST Dehumidifiers are used by NATO Army in Europe |
DST dehumidifier unitsF16,
Belgium, is protected by DST dehumidifiers when on ground |
How to
locate us ? Click here to see a Map Guide
Disclaimers: Our machine are not fail-safe product and it is therefore still
subject to possible failures though in extremely few cases. For very critical
dry
storage / production applications, where product can be damaged easily by higher
humidity, It is the end users’ responsibility to install failsafe devices,
like an automatic switch-over system, and/or remote alarm & monitoring system or
other form of spares and back up. The manufacturer or seller of this
machine will not bear any responsibility or entertain any claim of damage of
stored goods in cases where the machine fails in the midst of use. All the
product using 220-415 V are subjected to the risk of normal electrical machinery
like electrical shock, electrical fire etc if not used properly and not
serviced regularly . Thus yearly check and service is highly recommended.
The machines are not intrinsically safe and are not suitable for use in
flame proof area unless specified. For product used for more than 1
year, it is
advisable for user to send the machines for check, service and calibration
yearly for safe and long life usage. Contact of service centre may be obtained
from
the shop or agents selling these machines. Prolonged operation without check and
service is at the end user's own risk.
|
|
